UPDATE 09/23/2016
Bug 1622683 gets status "Fix Released". Master's delorean trunk 09/23 works for me. So you shouldn't have to apply workaround - redeployment works
Already tested.
END UPDATE
This post follows up TripleO deployment of 'master' branch via instack-virt-setup
Launchpad bug "Updating plans breaks deployment" https://bugs.launchpad.net/tripleo/+bug/1622683 still has status "In Progress" so to be able redeploy overcloud the workaround from https://bugs.launchpad.net/tripleo/+bug/1622720/comments/1 would be applied
**************************
Redeployment
**************************
[stack@instack ~]$ openstack stack delete overcloud
[stack@instack ~]$ . stackrc
[stack@instack ~]$ mistral environment-delete overcloud
Request to delete environment overcloud has been accepted.
[stack@instack ~]$ swift delete --all
Add NAT Default VNIC to each of bare metal nodes (VMs)
To enable Internet connectivity from Controller after
overcloud deployment at the moment when "overcloud" stack got
gracefully deleted and status of bare metal nodes (VMs) is down
****************************************
Make following updates on instack
****************************************
$ sudo ovs-vsctl show
$ sudo vi /etc/sysconfig/network-scripts/ifcfg-vlan10
DEVICE=vlan10
ONBOOT=yes
DEVICETYPE=ovs
TYPE=OVSIntPort
BOOTPROTO=static
IPADDR=10.0.0.1
NETMASK=255.255.255.0
OVS_BRIDGE=br-ctlplane
OVS_OPTIONS="tag=10"
$ sudo ifup vlan10
**********************************************************************
Make sure ovs-vsctl on undercloud has been updated
**********************************************************************
[stack@instack ~]$ sudo ovs-vsctl show
3dfb403a-c31d-4bb3-9851-08f2e7b7778f
Manager "ptcp:6640:127.0.0.1"
is_connected: true
Bridge br-int
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port int-br-ctlplane
Interface int-br-ctlplane
type: patch
options: {peer=phy-br-ctlplane}
Port "tapb104ab9a-36"
tag: 1
Interface "tapb104ab9a-36"
type: internal
Port br-int
Interface br-int
type: internal
Bridge br-ctlplane
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port "eth1"
Interface "eth1"
Port phy-br-ctlplane
Interface phy-br-ctlplane
type: patch
options: {peer=int-br-ctlplane}
Port "vlan10"
tag: 10
Interface "vlan10"
type: internal
Port br-ctlplane
Interface br-ctlplane
type: internal
ovs_version: "2.5.0"
***************************************************
Create network_env.yaml under ~stack/
***************************************************
[stack@instack ~]$ cat network_env.yaml
{
"parameter_defaults": {
"ControlPlaneDefaultRoute": "192.0.2.1",
"ControlPlaneSubnetCidr": "24",
"DnsServers": [
"192.168.122.5"
],
"EC2MetadataIp": "192.0.2.1",
"ExternalAllocationPools": [
{
"end": "10.0.0.250",
"start": "10.0.0.4"
}
],
"ExternalNetCidr": "10.0.0.1/24",
"NeutronExternalNetworkBridge": ""
}
}
Where 192.168.122.5 is instack VM Ip.
*************************
Deploy overcloud
*************************
#!/bin/bash -x
source /home/stack/stackrc
openstack overcloud deploy \
--libvirt-type qemu \
--ntp-server pool.ntp.org \
--templates /home/stack/tripleo-heat-templates \
-e /home/stack/tripleo-heat-templates/overcloud-resource-registry-puppet.yaml \
-e /home/stack/tripleo-heat-templates/environments/network-isolation.yaml \
-e /home/stack/tripleo-heat-templates/environments/net-single-nic-with-vlans.yaml \
-e $HOME/network_env.yaml \
--control-scale 1 --compute-scale 2
********************************************************************************
Up on completion proceed on undercloud (instack VM) as follows
********************************************************************************
Add route to ctlplane network
[stack@instack ~]$ sudo route add -net 192.0.2.0/24 gw 192.0.2.1
[stack@instack ~]$ sudo ip route
default via 192.168.122.1 dev eth0
10.0.0.0/24 dev vlan10 proto kernel scope link src 10.0.0.1
192.0.2.0/24 via 192.0.2.1 dev br-ctlplane scope link
192.0.2.0/24 dev br-ctlplane proto kernel scope link src 192.0.2.1
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.5
[stack@instack ~]$ . stackrc
[stack@instack ~]$ nova list
[stack@instack ~]$ neutron net-list
[root@overcloud-controller-0 ~]# nova service-list
FoxyProxy tuned for external network
List of instances launched and running via Nova CLI
*****************************************************
Controller's ovs-vsctl show report
*****************************************************
[root@overcloud-controller-0 ~]# ovs-vsctl show
d818c01e-d0ce-425d-a9c8-07e0ff541ea9
Manager "ptcp:6640:127.0.0.1"
is_connected: true
Bridge br-int
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port "tap19ce4553-8f"
tag: 2
Interface "tap19ce4553-8f"
type: internal
Port br-int
Interface br-int
type: internal
Port "qr-4a00fb57-90"
tag: 2
Interface "qr-4a00fb57-90"
type: internal
Port "qg-5b1fb5eb-d5"
tag: 4
Interface "qg-5b1fb5eb-d5"
type: internal
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Bridge br-ex
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port "vlan40"
tag: 40
Interface "vlan40"
type: internal
Port "eth0"
Interface "eth0"
Port "vlan20"
tag: 20
Interface "vlan20"
type: internal
Port br-ex
Interface br-ex
type: internal
Port "vlan30"
tag: 30
Interface "vlan30"
type: internal
Port "vlan50"
tag: 50
Interface "vlan50"
type: internal
Port "vlan10"
tag: 10
Interface "vlan10"
type: internal
Bridge br-tun
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Port "vxlan-ac100009"
Interface "vxlan-ac100009"
type: vxlan
options: {df_default="true", in_key=flow, local_ip="172.16.0.12", out_key=flow, remote_ip="172.16.0.9"}
Port "vxlan-ac10000d"
Interface "vxlan-ac10000d"
type: vxlan
options: {df_default="true", in_key=flow, local_ip="172.16.0.12", out_key=flow, remote_ip="172.16.0.13"}
ovs_version: "2.5.0"
**********************************************************************
Hypervisor status on Compute nodes (Newton RC1)
Qemu-kvm-ev-2.31 gets installed by default
**********************************************************************
[root@overcloud-novacompute-0 ~]# virsh --connect qemu:///system
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # version
Compiled against library: libvirt 1.2.17
Using library: libvirt 1.2.17
Using API: QEMU 1.2.17
Running hypervisor: QEMU 2.3.0
virsh # list --all
Id Name State
----------------------------------------------------
6 instance-00000004 running
[root@overcloud-novacompute-1 ~]# virsh --connect qemu:///system
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # version
Compiled against library: libvirt 1.2.17
Using library: libvirt 1.2.17
Using API: QEMU 1.2.17
Running hypervisor: QEMU 2.3.0
virsh # list --all
Id Name State
----------------------------------------------------
5 instance-00000005 running
*************************************
VIRTHOST Configuration
*************************************
[root@ServerVIRT1608 ~]# brctl show
bridge name bridge id STP enabled interfaces
brext 8000.525400b017dc no brext-nic
brovc 8000.525400948dc8 no brovc-nic
virbr0 8000.525400f83b3b yes virbr0-nic
vnet0
vnet3
vnet5
vnet7
[root@ServerVIRT1608 ~]# ovs-vsctl show
96876d44-cca3-4e93-b89c-8238b4745c3c
Bridge brbm
Port "vnet6"
Interface "vnet6"
Port "vnet4"
Interface "vnet4"
Port "vnet1"
Interface "vnet1"
Port "vnet2"
Interface "vnet2"
Port brbm
Interface brbm
type: internal
ovs_version: "2.5.0"
Bug 1622683 gets status "Fix Released". Master's delorean trunk 09/23 works for me. So you shouldn't have to apply workaround - redeployment works
Already tested.
END UPDATE
This post follows up TripleO deployment of 'master' branch via instack-virt-setup
Launchpad bug "Updating plans breaks deployment" https://bugs.launchpad.net/tripleo/+bug/1622683 still has status "In Progress" so to be able redeploy overcloud the workaround from https://bugs.launchpad.net/tripleo/+bug/1622720/comments/1 would be applied
**************************
Redeployment
**************************
[stack@instack ~]$ openstack stack delete overcloud
[stack@instack ~]$ . stackrc
[stack@instack ~]$ mistral environment-delete overcloud
Request to delete environment overcloud has been accepted.
[stack@instack ~]$ swift delete --all
Add NAT Default VNIC to each of bare metal nodes (VMs)
To enable Internet connectivity from Controller after
overcloud deployment at the moment when "overcloud" stack got
gracefully deleted and status of bare metal nodes (VMs) is down
****************************************
Make following updates on instack
****************************************
$ sudo ovs-vsctl show
$ sudo vi /etc/sysconfig/network-scripts/ifcfg-vlan10
DEVICE=vlan10
ONBOOT=yes
DEVICETYPE=ovs
TYPE=OVSIntPort
BOOTPROTO=static
IPADDR=10.0.0.1
NETMASK=255.255.255.0
OVS_BRIDGE=br-ctlplane
OVS_OPTIONS="tag=10"
$ sudo ifup vlan10
**********************************************************************
Make sure ovs-vsctl on undercloud has been updated
**********************************************************************
[stack@instack ~]$ sudo ovs-vsctl show
3dfb403a-c31d-4bb3-9851-08f2e7b7778f
Manager "ptcp:6640:127.0.0.1"
is_connected: true
Bridge br-int
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port int-br-ctlplane
Interface int-br-ctlplane
type: patch
options: {peer=phy-br-ctlplane}
Port "tapb104ab9a-36"
tag: 1
Interface "tapb104ab9a-36"
type: internal
Port br-int
Interface br-int
type: internal
Bridge br-ctlplane
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port "eth1"
Interface "eth1"
Port phy-br-ctlplane
Interface phy-br-ctlplane
type: patch
options: {peer=int-br-ctlplane}
Port "vlan10"
tag: 10
Interface "vlan10"
type: internal
Port br-ctlplane
Interface br-ctlplane
type: internal
ovs_version: "2.5.0"
***************************************************
Create network_env.yaml under ~stack/
***************************************************
[stack@instack ~]$ cat network_env.yaml
{
"parameter_defaults": {
"ControlPlaneDefaultRoute": "192.0.2.1",
"ControlPlaneSubnetCidr": "24",
"DnsServers": [
"192.168.122.5"
],
"EC2MetadataIp": "192.0.2.1",
"ExternalAllocationPools": [
{
"end": "10.0.0.250",
"start": "10.0.0.4"
}
],
"ExternalNetCidr": "10.0.0.1/24",
"NeutronExternalNetworkBridge": ""
}
}
Where 192.168.122.5 is instack VM Ip.
*************************
Deploy overcloud
*************************
#!/bin/bash -x
source /home/stack/stackrc
openstack overcloud deploy \
--libvirt-type qemu \
--ntp-server pool.ntp.org \
--templates /home/stack/tripleo-heat-templates \
-e /home/stack/tripleo-heat-templates/overcloud-resource-registry-puppet.yaml \
-e /home/stack/tripleo-heat-templates/environments/network-isolation.yaml \
-e /home/stack/tripleo-heat-templates/environments/net-single-nic-with-vlans.yaml \
-e $HOME/network_env.yaml \
--control-scale 1 --compute-scale 2
********************************************************************************
Up on completion proceed on undercloud (instack VM) as follows
********************************************************************************
Add route to ctlplane network
[stack@instack ~]$ sudo route add -net 192.0.2.0/24 gw 192.0.2.1
[stack@instack ~]$ sudo ip route
default via 192.168.122.1 dev eth0
10.0.0.0/24 dev vlan10 proto kernel scope link src 10.0.0.1
192.0.2.0/24 via 192.0.2.1 dev br-ctlplane scope link
192.0.2.0/24 dev br-ctlplane proto kernel scope link src 192.0.2.1
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.5
[stack@instack ~]$ . stackrc
[stack@instack ~]$ nova list
+--------------------------------------+-------------------------+--------+------------+-------------+---------------------+ | ID | Name | Status | Task State | Power State | Networks | +--------------------------------------+-------------------------+--------+------------+-------------+---------------------+ | 0212a5cc-c73e-43c3-bddb-51cac22f0060 | overcloud-controller-0 | ACTIVE | - | Running | ctlplane=192.0.2.9 | | a421c80b-54a5-4cc8-9414-45d45a27845b | overcloud-novacompute-0 | ACTIVE | - | Running | ctlplane=192.0.2.18 | | 3641a8da-c5fa-4975-9e43-c926522ecc2b | overcloud-novacompute-1 | ACTIVE | - | Running | ctlplane=192.0.2.13 | +--------------------------------------+-------------------------+--------+------------+-------------+---------------------+
[stack@instack ~]$ neutron net-list
+--------------------------------------+--------------+----------------------------------------+ | id | name | subnets | +--------------------------------------+--------------+----------------------------------------+ | 5309b1a3-f6c6-4bdd-a0bc-93f418853080 | external | 56fe052f-ba26-437b-94ab-b03688e06ad9 | | | | 10.0.0.0/24 | | 77440f54-0ce4-444c-8983-2ef2ae1408b4 | ctlplane | 76055a99-45e4-4b5a-b1fc-846c91137427 | | | | 192.0.2.0/24 | | 7b3e788a-ebdd-4e7c-b076-517ca62befb3 | tenant | 0a028e34-8a0a-48ce-88d8-5523b19eac0f | | | | 172.16.0.0/24 | | 813d17c3-bd58-490f-94a4-aefeb2057d22 | storage_mgmt | e3cdcf74-64fa-4837-b480-304a1329d109 | | | | 172.16.3.0/24 | | bcba764c-0b27-4785-b875-8b20bd28cd96 | internal_api | 1de0ff85-7525-4e1f-94ea-1bc6e060a096 | | | | 172.16.2.0/24 | | d4c8e9d8-bffc-4803-8ee4-bbff63eef9e1 | storage | f76d3eeb-c7d8-47e9-a2e3-95765975c292 | | | | 172.16.1.0/24 | +--------------------------------------+--------------+----------------------------------------+
[root@overcloud-controller-0 ~]# nova service-list
+----+------------------+-------------------------------------+----------+---------+-------+----------------------------+-----------------+ | Id | Binary | Host | Zone | Status | State | Updated_at | Disabled Reason | +----+------------------+-------------------------------------+----------+---------+-------+----------------------------+-----------------+ | 3 | nova-consoleauth | overcloud-controller-0.localdomain | internal | enabled | up | 2016-09-19T10:02:37.000000 | - | | 4 | nova-scheduler | overcloud-controller-0.localdomain | internal | enabled | up | 2016-09-19T10:02:31.000000 | - | | 5 | nova-conductor | overcloud-controller-0.localdomain | internal | enabled | up | 2016-09-19T10:02:30.000000 | - | | 6 | nova-compute | overcloud-novacompute-1.localdomain | nova | enabled | up | 2016-09-19T10:02:29.000000 | - | | 7 | nova-compute | overcloud-novacompute-0.localdomain | nova | enabled | up | 2016-09-19T10:02:35.000000 | - | +----+------------------+-------------------------------------+----------+---------+-------+----------------------------+-----------------+
FoxyProxy tuned for external network
List of instances launched and running via Nova CLI
*****************************************************
Controller's ovs-vsctl show report
*****************************************************
[root@overcloud-controller-0 ~]# ovs-vsctl show
d818c01e-d0ce-425d-a9c8-07e0ff541ea9
Manager "ptcp:6640:127.0.0.1"
is_connected: true
Bridge br-int
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port "tap19ce4553-8f"
tag: 2
Interface "tap19ce4553-8f"
type: internal
Port br-int
Interface br-int
type: internal
Port "qr-4a00fb57-90"
tag: 2
Interface "qr-4a00fb57-90"
type: internal
Port "qg-5b1fb5eb-d5"
tag: 4
Interface "qg-5b1fb5eb-d5"
type: internal
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Bridge br-ex
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port "vlan40"
tag: 40
Interface "vlan40"
type: internal
Port "eth0"
Interface "eth0"
Port "vlan20"
tag: 20
Interface "vlan20"
type: internal
Port br-ex
Interface br-ex
type: internal
Port "vlan30"
tag: 30
Interface "vlan30"
type: internal
Port "vlan50"
tag: 50
Interface "vlan50"
type: internal
Port "vlan10"
tag: 10
Interface "vlan10"
type: internal
Bridge br-tun
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Port "vxlan-ac100009"
Interface "vxlan-ac100009"
type: vxlan
options: {df_default="true", in_key=flow, local_ip="172.16.0.12", out_key=flow, remote_ip="172.16.0.9"}
Port "vxlan-ac10000d"
Interface "vxlan-ac10000d"
type: vxlan
options: {df_default="true", in_key=flow, local_ip="172.16.0.12", out_key=flow, remote_ip="172.16.0.13"}
ovs_version: "2.5.0"
**********************************************************************
Hypervisor status on Compute nodes (Newton RC1)
Qemu-kvm-ev-2.31 gets installed by default
**********************************************************************
[root@overcloud-novacompute-0 ~]# virsh --connect qemu:///system
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # version
Compiled against library: libvirt 1.2.17
Using library: libvirt 1.2.17
Using API: QEMU 1.2.17
Running hypervisor: QEMU 2.3.0
virsh # list --all
Id Name State
----------------------------------------------------
6 instance-00000004 running
[root@overcloud-novacompute-1 ~]# virsh --connect qemu:///system
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # version
Compiled against library: libvirt 1.2.17
Using library: libvirt 1.2.17
Using API: QEMU 1.2.17
Running hypervisor: QEMU 2.3.0
virsh # list --all
Id Name State
----------------------------------------------------
5 instance-00000005 running
*************************************
VIRTHOST Configuration
*************************************
[root@ServerVIRT1608 ~]# brctl show
bridge name bridge id STP enabled interfaces
brext 8000.525400b017dc no brext-nic
brovc 8000.525400948dc8 no brovc-nic
virbr0 8000.525400f83b3b yes virbr0-nic
vnet0
vnet3
vnet5
vnet7
[root@ServerVIRT1608 ~]# ovs-vsctl show
96876d44-cca3-4e93-b89c-8238b4745c3c
Bridge brbm
Port "vnet6"
Interface "vnet6"
Port "vnet4"
Interface "vnet4"
Port "vnet1"
Interface "vnet1"
Port "vnet2"
Interface "vnet2"
Port brbm
Interface brbm
type: internal
ovs_version: "2.5.0"
No comments:
Post a Comment